ThickSleeve

DuraRound

Downloads:
Order Form


Xymid’s DuraRound HD Thick Sleeves range from .038″ to 5.000″. They are lightweight. These sleeves are gray in color, are constructed of thermoset materials, with 2 to 6 layers, and come with the TruLoc™ registration notch, mechanically locked into place. An optional steel, stainless steel, or composite end ring with built-in notch is also available for the ultimate in sleeve ruggedness. They consist of our UltraFlex base sleeve or fiberglass, a compressible urethane layer, hard incompressible urethane foam to build thickness, a fiberglass outer wrap for increased strength and stiffness and our high durometer urethane outer coating. They can be easily cleaned using Isopropyl Alcohol, and are resistant to standard industry solvents such as alcohol and ketenes. Quantity discounts are available.

DuraRound Bridge Group

Technical Specifications

Characteristics

Specifics

DuraRound HD Thick Sleeves

DuraRound Cushion Sleeves

Dimensions

Wall Thickness

.038” – 5.000”

.140” – 5.000”

 

Repeat

A wide range is available

A wide range is available

 

BCD

2.3” – 13.4”

2.3” – 13.4”

 

Length

Up to 80”

Up to 80”

Tolerances

OD

+/- .001”

+/- .001”

 

TIR

Not more than .001”

Not more than .001”

Chemistry

Hardness

70-75 shore D

Custom designed softness

 

Material

Polyurethane

Polyurethane

 

Operating Temperatures

Max 150°F
Max exposure 30 minutes 135°-149°F

Max 150°F
Max exposure 30 minutes 135°-149°F

Features

Cut Tolerant

Hard coat holds up well against cuts

Not applicable

 

Notch design

The TruLoc™ registration notch is guaranteed under intended use not to come out for the life of the sleeve

The TruLoc™ registration notch is guaranteed under intended use not to come out for the life of the sleeve

Facility Requirements

Required Air Pressure

80 psi

80 psi

 

Required Air Flow

.42 ft3/sec    12Liters/sec

.42 ft3/sec    12Liters/sec

 

Proper storage temperature

66°F to 82°F
Humidity 50% RH max

66°F to 82°F
Humidity 50% RH max

Options

Inner Core

Mylar or Fiberglass

Mylar or Fiberglass

 

Protective End Rings

Protective end ring in steel, stainless steel, or composite with notch (wall thickness >.500”)

Protective end ring in steel, stainless steel, or composite with notch (wall thickness >.600”)

 

Notches

Available in all sizes and styles

Available in all sizes and styles

 

Scribe lines

Available on Axial (length) and Radial (around) dimensions

Available on Axial (length) and Radial (around) dimensions

 

Repair/Rework

Can be repaired or reworked under certain construction limitations

Can be repaired or reworked under certain construction limitations